Aluminum Sheet Thickness for Many Uses

Aluminum traffic sign sheet

When modifying traffic signs, the proper aluminum sheet thickness must be chosen based on the design drawings of the signs. The thickness of the aluminum plate is directly proportional to the sign's wind resistance and compression resistance.

In general, a small-area sign can benefit from a thin aluminum sheet, such as a 1.5- to 2-mm aluminum sheet. A sign is considered huge if it is larger than 5 square meters. In general, the thickness of the aluminum plate should be between 2.5 and 3.0 mm. If a single sign is larger than 9 square meters, its thickness must be 3.0–3.5 millimeters.

Marine aluminum plate

The thickness of an aluminum marine plate is defined by the hull structure, ship specs, parts used, and so on. Thin plates are normally employed as much as possible to reduce the hull's weight, but the corrosion depth of the plates during operation should also be addressed.

Aluminum sheets with a thickness of 2 mm are frequently utilized. To reduce welding, 2.0-meter-wide aluminum plates are frequently employed, while 2.5-meter-wide aluminum plates are utilized for large ships, with a length of 6 meters.

Aluminum ceiling

Aluminum ceilings are commonly used in engineering projects and home décor ceilings. It is critical to select an appropriate thickness because it has a direct impact on the user experience. The ceiling's aluminum sheet thickness will be one of the following: 0.5mm, 0.6mm, 0.78mm, 0.8mm, or 1mm.

The aluminum curtain wall

In general, the thickness of our roof panels is greater than 2.5 mm. Because summer thunderstorms are devastating to thin aluminum sheets, there is no warranty for curtain walls if the aluminum sheet thickness is less than 2.5mm, regardless of service life or safety.

Checkered aluminum plate

The anti-skid aluminum checker plates typically have 5 bars, while the compass aluminum checker plate does not. It is mostly used for anti-skid applications on the ground or work platforms. The length of an aluminum tread plate is typically 6m, the width is 800 mm-1800 mm, and the thickness is 0.5 mm-8 mm.