0086- 18290495485
 

How are Aluminum Panel Curtain Wall Components Processed?

Views: 202     Author: Julong     Publish Time: 2023-06-18      Origin: aluminum panel systems manufacturer

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button
How are Aluminum Panel Curtain Wall Components Processed?

Aluminum veneer curtain wall components are critical components in the production of aluminum veneer curtain walls. Many of my acquaintances are confused about how aluminum veneer curtain wall components are manufactured. Aluminum panel curtain wall components are certainly processed and manufactured in the processing plant. Perforated Metal Sheets Factory will then explain the manufacturing procedure.


The first step in the processing of aluminum veneer curtain wall components is to prepare the production environment and the processing.


1. Curtain wall component processing should take place in a clean processing workshop.


2. The processing equipment and tools must be capable of meeting the accuracy criteria.


3. All measuring instruments must be accurate in their measurements and must undergo routine inspections to maintain their measurement certification.


4. To tightly control the quality of the materials, the kind, specification, and quantity of aluminum materials, aluminum plates, and other materials that enter the site must be examined. After that, quality inspections must be carried out following applicable standards.


Technical specifications for processing curtain wall components are the second step in the aluminum veneer curtain wall component manufacturing process.


1. Before processing, the aluminum material needs to be straightened, corrected, and covered with protective tape;


2. Before processing activities, compare the processing dimensions to the processing drawings to ensure they are accurate;


3. The permitted deviation of the material cut length dimension is 1.0mm, and the end inclination deviation is 15′.


4. There should be no visible processing deformation at the cutting end, and the burr should be no more than 0.2mm; the permissible deviation of the hole position is 0.5mm, the allowable deviation of the hole distance is 0.5mm, and the oblique deviation is no more than 1.0mm.


5. Bolt hole processing must adhere to design specifications.


The third phase in the fabrication of aluminum veneer curtain wall components is as follows: processing of curtain wall components


1. The fabrication of aluminum veneer curtain wall components:


Receive processing notice → material requisition → wrap protective tape → cutting → drilling → quality inspection → warehousing.


2. The essentials of each process in the processing of aluminum veneer curtain wall components:


Take orders:

When you receive the processing order, closely compare it to the processing drawing. If there is no problem, you must finish the quality and quantity according to the order's delivery date; if the processing order does not match the processing drawing, it must be reported to the production department promptly. Only after correct processing can processing be resumed.


The processing order's statistics, material computation, and material matching must be coordinated with the materials department, and the required materials must be arranged ahead of time.


Material requisition:

After double-checking that it is correct, proceed to the material department to complete the material request procedures based on the specifications, model, amount, and color of the materials.


When using and transporting materials, care must be taken not to scratch the surface or cause material confusion.


Protective tape for packing: Before processing, the surface of the components should be cleaned, and then the protective tape should be applied. This prevents wrinkles, bubbles, and cracks.

Contents