0086- 18290495485
 

Key Applications for Aluminum Honeycomb Panel

Views: 237     Author: Julong     Publish Time: 2024-01-26      Origin: aluminum panel systems manufacturer

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button
Key Applications for Aluminum Honeycomb Panel

There are many applications for aluminum honeycomb panels, from aircraft to sanitary partitions. In the decoration industry, these applications can be further classified into three categories. Conference rooms, hallways, KTVs, bars, billboards, subways, stations, banks, hospitals, and so on are typical examples. These consist of bank projects, corporate projects, government projects, real estate projects, and so forth.


1. A wall of curtains

The honeycomb aluminum panel is made of a composite material as opposed to the aluminum veneer used on curtain walls. There is no need to add reinforcing ribs because the panel can support its weight thanks to the internal aluminum honeycomb. Reinforcement ribs must be welded to the rear of the board for standard curtain wall aluminum veneers wider than 1 meter or longer than 2 meters.


2. The ceiling

Corner frames and hanging keels are required for the assembly of aluminum honeycomb panel ceilings. Good seam tightness characterizes the aluminum honeycomb panel ceilings, allowing electrical equipment lines to flow through the gaps. In the event of a short circuit fire, the fire can be put out quickly, and the maximum somewhat minimizes user losses. Furthermore, the aluminum honeycomb panel ceiling is aesthetically pleasing and can be tailored with different imitation patterns, making it appropriate for hallways, bedrooms, kitchens, and other spaces.


3. Partition

Bathrooms, exhibition halls, and other spaces use aluminum honeycomb panel partitions. Edge-sealed honeycomb panels are typically used because they have stronger corners, stable compression resistance, and customizable sizes. After extended use, the aluminum honeycomb panel won't tarnish, rust, or distort because of its durability. Usually, the thickness is between 10 and 20 mm. The panel is lightweight and simple to install, and it offers good heat and sound insulation. Furthermore, the anti-fouling feature can prolong the duration of a clean bathroom. It is simple to clean with just a wipe. Since an aluminum honeycomb panel is used for the partition, people will no longer see the deformation and damage of the partition board caused by a cigarette butt in certain public restrooms. Honeycomb panels made of aluminum have a high fire resistance. Typically, the raw material is an aluminum alloy that resists fire and can withstand temperatures as high as 500°C. It's a fantastic option for dividers.


4. Aluminum Honeycomb Panel: Originally Designed for Aerospace

Aluminum honeycomb panels are appropriate for use in the building of automobiles, boats, and other structures. Originally, it was a specialized material for aircraft. It must therefore adhere to stringent technical data. The thermal conductivity of the aluminum honeycomb panel is 0.88w/m.k. Its tensile strength exceeds 83MN/m2, and its density ranges from 3.6 to 5.3 kg/m2. Modern, state-of-the-art machinery using hot molding technology is used to manufacture aluminum honeycomb composite panels. The inner and outer aluminum skins' thermal expansion and cold contraction are synchronized because of the high thermal conductivity between the aluminum sheet and the honeycomb body. Small holes in the aluminum covering sheet allow gas inside the panel to circulate freely. The panel features a sliding mounting buckle system that is impervious to cold contraction or thermal expansion.


Premium 3003H24 alloy aluminum plates or 5052AH14 high manganese alloy aluminum plates are used as the primary base material in aluminum honeycomb panels. The panel has a thickness that varies from 0.8mm to 1.5mm. Surface treatments allow for the separation of the panels into two categories: color-resistant paint panels and fluorocarbon roll-coated panels. The corrosion- and scratch-resistant paint is resistant to acid rain. It is more capable of self-cleaning than PVDF. The bottom plate has a thickness ranging from 0.6 to 1.0 mm, while the panel's overall thickness is approximately 25 mm.


Since the 1960s, aluminum honeycomb panels have been used in many different fields around the world due to their exceptional performance against high wind pressure, shock absorption, sound insulation, heat preservation (high thermal conductivity inside the panel), flame retardancy, and high specific strength. However, honeycomb technology was not used in China until after it quickly advanced abroad. A single aluminum honeycomb composite panel weighs only 1/10 of the weight of a steel plate and 1/5 of that of an aluminum veneer with the same stiffness. The aluminum honeycomb core's interconnections resemble numerous I-beams. To increase the stability of the plate, the core layer is fixed throughout. Its ability to withstand wind pressure is far greater than that of aluminum slabs and veneers. It also has good flatness and resists deformation even with large cell sizes. It is the favored lightweight material in the construction sector because of all these benefits.


5. Features And Applications Of Aluminum Honeycomb Panels

The panels with aluminum honeycomb of 1100, 3003, and 5005. The base board has thicknesses of 4mm, 6mm, 10mm, 12mm, 25mm, and 50mm, while the skin board has thicknesses ranging from 0.5mm to 1.0mm. PVDF, FEVE, and PE paintings are offered. PVDF has a coating thickness ranging from 25 to 33 um, while PE has a lower coating thickness of 15 to 20 um. The common dimensions are 1220 x 2440 mm, 1250 x 3000 mm, and 1500 x 3000 mm.


Aluminum honeycomb panels offer superior fire resistance. Aluminum plates, their raw material, are by nature a non-combustible material. The panels are made of an eco-friendly material that doesn't emit any hazardous gases or radioactivity. Additionally, they have an almost 100% recycling rate. Here is our Honeycomb Wall Panels.


Additionally resistant to corrosion are aluminum honeycomb panels. Their corrosion resistance and integrity have been greatly strengthened by 48-hour slat spray and epoxy fluorocarbon treatment. Neither the inside nor the exterior of the panels have any bubbles, cracks, or pinholes. The panels are easy to assemble or disassemble thanks to their lightweight design. They remain stationary under normal pressure and shock once installed. They are simple to transport from one location to another because they are so light.


Aluminum honeycomb panels find application in the construction of aircraft, automobiles, and vessels; ornamentation of wall panels, ceilings, overhead floors, and elevators; room division; embellishment of restrooms and kitchens; furniture panels; and load-bearing sheets that demand the production of decorative load-bearing sheets that are lightweight and highly durable.

Contents