Views: 201 Author: Julong Publish Time: 2023-07-20 Origin: Site
The thinnest plastic honeycomb plate (a compound with an aluminum-plastic plate) can be only 5mm thick. Commonly used composite ceramic tile or granite, both just approximately 12mm thick, transportation has saved a lot of money, the building has the load limit of the case it is the best choice.
Plastic and ceramic tile, granite, and aluminum honeycomb panels, such as composite, bending, bending, and shear strength, have dramatically improved, drastically lowering the transit, installation, and usage of the damage rate in the process. Here is Granite Look Aluminium Honeycomb Panel.
Ordinary plastic original plates (whole board) used in the installation process or after the use of the process, such as the use of cement wet paste, are likely to show a variety of different stains and discolorations after six months or a year that is very challenging to remove. Because the honeycomb panels are more stiff and compact, this won't happen because there is a thin coating of adhesive available to stop it.
As a result of the aforementioned traits, the installation process has significantly increased in efficiency and safety while also lowering costs, regardless of weight, easy-to-break (strength, etc.), or color separations.
Plastic decorative parts, whether inside or outside walls, floors, windowsills, porches, desktops, and so forth, are not problematic when used with the regular original plate (whole body plate), but no decoration company has the guts to take a chance with the ceiling, whether it be made of plastic or granite. In addition, aluminum honeycomb panels that were attached to plastic and aluminum-plastic panels used honeycomb technology to cut through the stone decoration of the restricted area. It weighs only 1/5 to 1/10 the weight of the plate because it is so light. It is not appropriate to use stone to decorate the ceiling.
Due to its hollow, equilateral hexagonal aluminum bee core, honeycomb panel, and plastic have the qualities of sound insulation, moistureproof, heat insulation, and cold resistance. As a result, these traits go far beyond the board's performance traits.
Because thin stone composite material is lighter, transport installation costs are reduced, and the more expensive varieties of stone, made of honeycomb panels, are priced differently than the original plate of the finished board price. low price
Because the thin stone honeycomb plate is lighter, the transport installation on saves a portion of the cost, and for the more expensive varieties of stone, the finished plate price is lower because the honeycomb panels are different degrees than the original plate.
The stone original plate, which is 1.75 cm thick and is divided into 3 pieces to make the plastic Honeycomb plate, may be turned into a block that is three times larger than the original plate. Therefore, it is very helpful for environmental protection to fully utilize mine resources while simultaneously lowering the amount of pollutants generated during manufacturing.
The Intricate Process of Manufacturing Aluminum Composite Panels
Hyperboloid Solid Aluminum Sheet Innovation in Structural Design
Painting Hollow Aluminum Veneer Techniques and Tips for a Perfect Finish
Wood Aluminum Panel Fusion of Natural Warmth and Modern Strength
Stone Panel Aluminum Honeycomb Modern Marvel in Building Materials
Enhancing Architecture and Design with Color Coated Aluminum Coil