EnglishViews: 310 Author: Julong Publish Time: 2023-03-27 Origin: aluminum panel systems manufacturer
In the previous article, we learned what stone aluminum honeycomb panels are. This article mainly introduces its nine advantages.
Marble composite panels can be the thinnest only 5mm thick (and aluminum honeycomb panel board composite). Commonly used composite tile or granite, but also only about 12mm thick, transportation will save a lot of costs, and the building has a load limit in case it is the best choice.
Marble and tile, granite, aluminum honeycomb panels, and other composites' bending and shear strengths have been significantly improved, greatly reducing the rate of breakage during transportation, installation, and use.
Ordinary marble from the original board (through the board) in the installation process or later use process, such as wet paste with cement, it is likely that half a year or a year later, the surface of the marble appears a variety of different discolorations and stains that are very difficult to remove. Composite board, because its substrate is more hard and dense, while at the same time having a thin layer of glue, avoids this situation.
Because the marble composite board is used 1m2 of the original board (through the board) cut into 3 or 4 pieces into 3m2 or 4m2. The pattern and color of these 3 or 4m2 are almost 100% the same, thus it is easier to ensure the consistency of the color and pattern when using a large area.
Because of the above characteristics, in the installation process, regardless of weight, fragility (strength, etc.), or split color splicing, installation efficiency, and safety have greatly improved, while installation costs have also been reduced.
Marble decorative parts, whether internal or external walls, floors, windowsills, doorways, desktops, etc., the ordinary original board (through the board) are not a problem. Only the ceiling whether it is marble or granite, any decorative companies do not dare and can not take the risk. And marble, aluminum composite panels and aluminum honeycomb bonded after the breakthrough of this stone decoration of the forbidden zone. Because it is very light—the weight of only 1/5 to 1/10 of the through plate—to decorate the ceiling with stone, is not it?
Composite panels are made of aluminum honeycomb panels and marble because of their hollow aluminum bee core made of an equilateral hexagonal shape that has sound insulation, moisture protection, heat insulation, and cold performance. Thus, these features go far beyond the performance characteristics not possessed by the through-body panels.
Stone aluminum honeycomb composite panel because it has the performance characteristics of sound insulation, moisture proofing, and heat insulation, and therefore, after installation indoors and outdoors, can greatly reduce the consumption of electrical and thermal energy.
Because the stone composite material is thinner and lighter, the transportation and installation will save a part of the cost, and for the more expensive varieties of stone, the composite panels are to varying degrees more expensive than the original plate of the finished board price.
Aluminum honeycomb panels provide the benefits of partition performance.
(1) Fire: aluminum plate for non-combustible materials.
(2) Corrosion resistance: aluminum honeycomb panels are surface treated by epoxy fluorocarbon, with strong corrosion resistance. Salt spray for 48 hours without pinholes, cracks, no blistering.
(3) Environmental protection: honeycomb panels are pure aluminum products that do not evaporate any harmful gases, are non-radioactive and can be completely recycled, making them 100 percent environmentally friendly products.
(4) Aluminum honeycomb panels are easy to disassemble, and will not demolish the panels. Due to its lightweight and easy transportation, it can be transported to different places and reused many times. This is because the other partition panels cannot be compared with it. Do you know about the Stone aluminum honeycomb panel?
