The manufacturing of hyperbolic aluminum veneer

The hyperbolic aluminum veneer processing stages are mostly divided into two parts:

The first step is to process sheet metal

Sheet metal processing is mostly used to enhance the look and specifications of hyperbolic aluminum veneers and other directions. The production process involves cutting, crimping, arc bending, welding, polishing, and buffing the aluminum veneer to the appearance and requirements required for an engineering building. This step influences critical factors such as the slope and look of the aluminum veneer.

Painting is the second step in the procedure

Painting refers to the application of paint on processed aluminum alloy panels. Painting is classified into two types: manual service painting and equipment painting. Equipment painting is generally only available for standard, but this type of aluminum veneer is rarely applied to specific applications. The vast majority of domestic manufacturers use hand service coating. One of the advantages of hand service painting is that it can be applied in any quantity, size, or color you choose. Hyperbolic aluminum veneer must be painted before painting to achieve the best good results.

To ensure the painting quality of double-bent aluminum veneer, it is necessary to take some necessary solutions before painting. The purpose of a double-bent aluminum veneer is to remove the oil stains on the upper edge of the aluminum alloy profile so that the raw material of the coating will adhere to the surface of the aluminum alloy profile as soon as possible.

The first step is to clean the hyperbolic aluminum veneer with cold water to remove all the dust on the hyperbolic aluminum veneer. The second step is to clean the hyperbolic aluminum veneer again with edible alkali. The alkaline chemicals can reasonably dissolve various vegetable oils on the hyperbolic aluminum veneer and fill the stains that cannot be cleaned by cold water; the third step is to clean the residual alkaline chemicals with cold water to prepare fully for the next process; the fourth step is to clean the hyperbolic aluminum veneer again with the acid and alkaline aqueous solution, the purpose is to clean the residual chemical changes on the surface of the hyperbolic aluminum veneer with the acid and alkaline aqueous solution. The fifth step is to polish the hyperbolic aluminum veneer once more with cold water, followed by chrome-plating the hyperbolic aluminum veneer. The seventh step is to use the last cold water to clean the chrome-plated hyperbolic aluminum veneer.

Before spraying hyperbolic aluminum veneer, the answer is primarily to clean the various chemicals on the hyperbolic aluminum veneer, followed by chrome treatment. To completely remove any stains from the surface of the hyperbolic aluminum veneer, clean it with a pH water solution. To retain awareness of the hyperbolic aluminum veneer cleaning process, cold water should be cleansed independently from the methods and steps during this period. Following the completion of all seven cleaning methods and procedures, the following painting job can begin only when the cleaning quality has been tested and regulated.

The fabrication of hyperbolic aluminum veneer began once the sheet metal processing and painting processes were completed. Because of the high standard of the hyperbolic aluminum veneer processing process, competent specialists are required for the actual operation; otherwise, deviation from the design scheme will readily occur, endangering the quality of the hyperbolic aluminum veneer.