EnglishViews: 237 Author: Julong Publish Time: 2023-10-30 Origin: aluminum panel systems manufacturer
Aluminum corrugated composite plate is another name for aluminum corrugated composite board. It is made of the aluminum alloy AL3003H16-H18. The thickness of the upper one is 0.81.0mm, the thickness of the bottom is 0.40.5mm, and the thickness of the core is 0.2mm, and its production is fully automated using ERP System quality management. Cold pressing in the same line to form water corrugated type, the bonding surface of the thermosetting two-component structural resin adhesive and the panel back sheet is curved, increasing bonding strength and metal sheet adhesion. To ensure that bonding performance is stable and long-lasting.
The aluminum corrugated composite plate perfectly combines functions and aesthetics, correcting the flaws of the aluminum single board and the aluminum sandwich panel, making the appearance more vivid, and significantly improving the decorative appearance of the building.
The bonding properties of aluminum corrugated composite sheets are stable and long-lasting. Because the 180-degree peeling strength is higher than that of the honeycomb panel due to the tensile and compressive strength, it has ultra-high surface flatness and easy processing, shortening the construction time to save money, and the light-weight reduction of the building's disclosure load can extend the life of the building. It has a vibrant color palette, is simple to clean and maintain, and has excellent corrosion resistance, anti-fouling ability, and durability. By environmental regulations, no harmful gases are released.
Lightweight and cost-effective, with a thickness of 6mm and a specific gravity of 4.3kg/m2. Because the face material's heavy load is small, the structural support keel can be reduced and made more cost-effective. The board's largest specification: large size of 1550mm (width) to 6000mm (length), improve material utilization rate, and rationally select various curtain walls to improve material utilization and reduce costs.
The weight per unit area of the aluminum corrugated composite plate is 5kg/m2, which reduces construction time and increases efficiency. Because of its lightweight, the building's longevity can be extended by lowering its exposure load.
It is simple to process and install because it can be cut, punched, bent, and formed into a shaped flat plate or curved plate. Rivets, which are simple and firm and have architectural art, can connect the ribs and the reinforcing center.
Aluminum corrugated composite plate is easy to clean and maintain, non-toxic, and emits no harmful gases, meeting environmental protection standards.
Noise reduction: Because the core plate is corrugated, it produces surface reflection on sound waves and eliminates acoustic coupling between the panel and the back plate, improving sound insulation performance by more than 35 decibels.
The water-corrugated core of the aluminum corrugated composite plate forms an air passage between the panel and the back plate, making it the best product for thermal insulation. The air in the channel warms up and carries away heat as a result of the action of solar radiation, providing thermal insulation. The upper and lower ends of the corrugated channel are sealed in the cold area. Because of the closed mechanical structure of the body, the hot spot rate is reduced. The stored heat energy reduces the loss of indoor heating heat and has thermal insulation performance when exposed to sunlight.
Fire performance: Aluminum corrugated composite plate is made of aluminum alloy and has a fire rating of A2 non-combustible products.
The curtain wall ACP cladding is constructed from a high-quality aluminum plate with a polypropylene core. The surface layer is composed of fluorocarbon spray, which is resistant to ultraviolet light, temperature, and atmospheric erosion. It also has a high wind resistance and can be used for secondary development.
The ACP cladding curtain wall is lightweight, strong, waterproof, anti-fouling, fireproof, and corrosion-resistant, with good processing performance, low maintenance costs, and a long service life. The aluminum veneer can be formed into various arcs and shapes, the surface can be sprayed with a variety of colors, beautiful patterns can be formed on the wall surface, and the glass curtain wall can be combined into various appearances to give the building a more noble and elegant style.
The outer wall ACP cladding is made of a high-quality, high-strength aluminum alloy plate, with thicknesses ranging from 2.0 to 3.0. The maximum size of conventional materials is 1220mm*2400mm, which can be customized to meet the needs of the customer. Panels, ribs, and corner codes make up the majority of its structure.
The corner code can be bent or stamped directly from the panel or framed on the panel's flange. The ribs are joined together with welding screws behind the board surface to form a solid whole, greatly increasing the strength and rigidity of the aluminum single-board curtain wall and ensuring flatness and seismic resistance over time. If sound insulation is required, it can be installed efficiently inside the aluminum plate.
1. Does the curtain wall ACP cladding manufacturer have a formal national quality inspection report that demonstrates compliance with national building energy conservation and fire safety standards?
2. Whether the curtain wall ACP cladding panel is flat.
3. Whether a record or typical engineering case exists in the project area.
4. Is there a construction plan that matches the product?
