What is a sculpted aluminum veneer?

A sculpted aluminum veneer is a strong and dependable outside option for both low-rise and high-rise structures. The system is resistant to strong wind pressure and works well in corners, on roofs, and in other unique locations. The panels are offered with a high-performance fluorocarbon coating in a variety of colors, with good paint, corrosion, and UV resistance. To understand the carved aluminum veneer, consider the four points listed below.

1. Material and structure

The aluminum veneer curtain wall is made of high-quality, high-strength aluminum Taikin plate, with common thicknesses of 2. mm, 2.5 mm, and 3. mm, model 33, state H24. Its structure consists mostly of a panel, reinforcing bar, and corner code. The corner code can be directly bent and stamped by the panel, or it can be riveted on the folded edge of the panel. After the panel surface, the reinforcing bars are linked using welding screws, forming a cohesive whole that considerably increases the strength and stiffness of the aluminum veneer curtain wall. This assures long-term flatness as well as wind and seismic resilience. If sound insulation and heat preservation are needed, these materials can be installed on the inside of the aluminum panel.

2. Surface treatment

The surface of the aluminum veneer curtain wall is generally treated with fluorocarbon spraying after pretreatment such as chroming. Fluorocarbon coating topcoat and varnish of polyvinylidene fluoride resin (KAHAR5). It is generally divided into two, three, or four coats. Fluorocarbon coating has excellent corrosion and weathering resistance to acid rain, salt spray, and various air pollutants. It has excellent resistance to heat and cold, can resist strong ultraviolet radiation, can be maintained for a long time without fading or chalking, and has a long service life.

3. Characteristics

An aluminum veneer curtain wall is light in weight, high in strength, waterproof, anti-fouling, fireproof, corrosion resistant, has good processing performance, a low maintenance cost, and a long service life. Aluminum curtain wall veneer is processed into curved and shaped surfaces, and the surface can be sprayed in various colors to form various beautiful patterns on the wall. And it can be combined with glass curtain walls and so on to form different appearance shapes, making the building more noble and elegant.

4. Application range

A carved aluminum veneer is suitable for the decoration of various building walls, lobby facades, column decoration, elevated corridors, pedestrian bridges, elevator wrapping, balcony packaging, advertising instructions, indoor-shaped ceiling, etc.

Hot Tags: Aluminum veneer, Aluminum composite board, Sculpted aluminum veneer, Decorative Metal veneer