EnglishViews: 232 Author: Julong Publish Time: 2023-11-03 Origin: aluminum panel systems manufacturer
Beautiful appearance, long-lasting, lightweight, high strength, high temperature, good fire resistance, strong acid resistance, good sound insulation, easy maintenance, easy cleaning, low cost, good decorative effect, and so on are all characteristics of aluminum composite panels. On one side, it has an aluminum layer and a plastic layer, and on the other, it has a double layer. It has a soft one side and a hard one. Double-sided aluminum composite panel is a popular home decoration material.
Aluminum composite panels are commonly specified as 1220*2440, which is 2.44m long and 1.22m wide. It can be used as a whole ceiling piece. It can also be cut to your specifications. It is more adaptable when hanging some unusually shaped tops. Aluminum composite panels can be used for door panels, door pockets, window coverings, and furniture decorative panels, in addition to kitchen and bathroom ceilings.
Aluminum-clad plates are more expensive than aluminum-clad plates, and aluminum-clad plates are relatively less expensive. Aluminum composite panels are best used at home or in small spaces. The commercial atmosphere is too strong when used in large areas.
Aluminum composite panels are generally recommended for use in the decoration of office buildings. As a result, it is not recommended to use aluminum composite panels for large-scale home ceiling decoration.Aluminum buckle panels are recommended. Experts advise choosing brand products when purchasing aluminum gusset and aluminum composite panels. In terms of quality and service, brand products are relatively standardized and guaranteed.
Aluminum alloy gussets outperform traditional ceiling materials in texture and decoration. Click here for Ceiling Aluminum Veneer.
The aluminum alloy gusset plate is classified into two types: sound-absorbing and decorative. The sound-absorbing plate features round holes, square holes, long round holes, rectangular holes, triangular holes, large and small combined holes, and other anti-corrosion and shockproof features. Waterproof, fireproof, sound absorbing performance, and a smooth surface are all features of this product.
The bottom plate is primarily white or lead gray in color. The decorative board is decorated with care, the lines are simple and smooth, and the colors include bronze, gold, red, blue, milk white, and so on.
There are three types of aluminum gusset plates, according to the aluminum gusset process: sprayed aluminum gusset plate, roller-coated aluminum gusset plate, and coated aluminum gusset plate, which gradually increase the life consumption and performance. The sprayed aluminum gusset plate has a normal consumption period of 5-10 years, the roller-coated aluminum gusset plate has a consumption period of 7-15 years, and the coated aluminum gusset plate has a consumption period of 10-30 years.
Strips, squares, grids, and other shapes are available, but the grid shape cannot be used for kitchen and bathroom ceilings; the maximum size of the rectangular board is 600mm*300mm, and the width of the general room is approximately 5 meters, the larger the room. The decoration is made up of long strips, and the overall effect is more powerful.
300 mm*300 mm is a common size for decorating small rooms. You can mix and match the two colors to make the ceiling look more appealing. The thickness of the aluminum gusset plate varies from 0.4 to 0.6 to 0.8 mm.
The thickness of the aluminum gusset plate determines its length and consumption time. However, due to the poor thermal insulation performance of the metal plate, when the metal plate is chosen for the ceiling decoration, heat-absorbing and sound-absorbing material such as glass wool or rock wool can be used to achieve the effect of heat insulation and sound absorption.
Julong aluminum composite sheet can help you create a simple, modern, stylish, clean, and cost-effective shop door. Is there a market for ACP material? Do you want to learn more about our product? Julong is a Chinese composite panel manufacturer with 16 years of experience in production and sales.
The aluminum composite panel ceiling installation process is presented in three parts: aluminum composite sheet construction, construction plan preparation, and construction quality standards.
(1) First, inspect the skeleton for quality, paying special attention to the straightness of the boom, even force, and a distance between the keels of no more than 500mm. If it is humid, the spacing must be reduced appropriately. The keel's lower surface is smooth and has no falling sensation. The main and accessories are inextricably linked and can be bound following confirmation.
(2) The cutting of the board should be broken along the cutting so that the cutting board's edge is straight and square, with no defects such as missing corners.
(3) When the plank is fixed, the aluminum composite panel's side (enveloped edge) is laid perpendicular to the supporting keel, and the suspension is suspended under the weight. When docking, aluminum composite sheets should be snug but not pressed in place. They can begin from the corner or the middle row. It is not recommended to lay them both at the same time. The seams should be straight, wide, and narrow, with no staggering.
(4) When seaming, the aluminum composite panel should be tight when docked but not firmly pressed in place, the joints should be staggered, and the joints on both sides of the wall should not fall on the same keel; when using double-layer panels, the second layer slit of the plate should not fall on the same vertical keel as the seam of the first layer, and the double gypsum board should be stitched together by mistake.
In general, the thickness of an aluminum composite panel for external use is not less than 0.2mm, and the price of an aluminum composite panel is 8-15 USD/m2. The internal aluminum-plastic panel thickness is greater than 0.1mm, less than 0.2mm, and the aluminum composite panel price is 6-8USD/m2.
(1) Work done prior to the installation of an aluminum composite panel ceiling Before installing the aluminum composite panel, first inspect the skeleton, paying special attention to the straightness of the hanger and the force is even, the distance between the keels is no more than 500mm (the design of the wet environment requires proper spacing), and the lower surface of the keel is smooth and has no falling sensation. The accessories are tightly and firmly connected, and the products can be bound after confirmation.
(2) The cutting of the board is broken along the cutting, resulting in a straight and square edge with no defects such as missing corners.
(3) The planking is secured, and the side and (enveloped edge) of the aluminum composite panel are laid perpendicular to the supporting keel, with the suspension suspended to the right. When docking the aluminum composite panel, it should be snug but not pressed in place. It can begin from a corner or a middle row, and it is not recommended to lay it all at once. It is required that the plate seams be straight, uniform, and wide, with no staggering.
(4)Seams, aluminum composite panels must be tight when butted but cannot be firmly pressed in place, joints must be staggered, and joints on both sides of the wall must not be on the same keel; when using double-layer panels, the second laminate must be tight. The slits cannot be on the same vertical keel as the first layer's seam, and the double-layer plasterboard must be stitched together.
Q1: Is the process of constructing an aluminum composite panel ceiling the same as the process of constructing an aluminum panel?
a.A wooden keel structure with a light steel keel structure for aluminum plates.
b. The installation of the aluminum plate and aluminum composite panel is the same, except that the aluminum plate is processed and formed at the construction site, and the aluminum composite panel is processed and formed after the construction site.
Do you have a demand for aluminum composite panels? Are you interested in our product? Julong is a professional Chinese composite panel manufacturer with many years of producing and selling experience.
