Aluminum Sheet Thickness for Various Uses

Aluminum traffic indicator sheet

When customizing traffic signs, the appropriate aluminum sheet thickness must be chosen based on the design drawings of the signs. The thickness of the aluminum plate is directly linked to the sign's wind resistance and compression resistance.

In general, a small-area sign can benefit from a thin metal sheet, such as a 1.5-2 mm aluminum sheet. A sign is considered big if it is larger than 5 square meters. In general, the thickness of the aluminum plate should be between 2.5 and 3.0 millimeters. If a single sign is larger than 9 square meters, its thickness must be 3.0-3.5 millimeters.

Marine aluminum frame

The thickness of an aluminum marine plate is decided by the hull structure, ship specifications, and use parts, among other factors. Thin plates are usually used as much as possible to reduce the hull's weight, but the corrosion depth of the plates during use should also be considered.

A 2mm metal sheet is commonly used. To minimize welding, 2.0m wide aluminum plates are commonly used, and 2.5m wide aluminum plates are used for large ships, with a length of 6 meters.

The roof is made of aluminum

Ceiling Aluminum Veneers are commonly used in engineering projects and house decoration ceilings. It is critical to select an appropriate width because it has a direct impact on the user experience. The ceiling's metal sheet thickness will be one of the following: 0.5mm, 0.6mm, 0.78mm, 0.8mm, and 1mm.

The curtain wall is made of the aluminum sheet

In general, the thickness of our roof tiles is greater than 2.5mm. There is no assurance for curtain walls if the aluminum sheet thickness is less than 2.5mm, regardless of service life or safety because summer thunderstorms are a fatal injury to the thin aluminum sheet.

Checkered aluminum panel

The compass aluminum checker plate is typically 5 bar and the anti-skid aluminum checker plate is. It is primarily used for anti-skid applications on the ground or work surfaces. Commonly used specifications of aluminum tread plate: the length is generally 6m, the width is 800 mm-1800 mm, and the thickness is 0.5 mm-8 mm.